What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Lysol Brand Bathroom Foam Cleaner, Summer Fresh, Aerosol, (Canadian Market)-06/24/2019
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaLysol Brand Foaming Bathroom Cleaner, Summer Fresh, Aerosol, kills viruses, bacteria, and mildew with little to no scrubbing. Lysol Brand Foaming Bathroom Cleaner prevents the growth of mold and mildew, while helping to fight viruses, bacteria, and everyday grime.
Purpose of product.
Usage: Mold and mildew eliminatorStructure such as solid, liquid, aerosol etc.
Form: aerosolDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 11, 20161680 Tech Avenue Unit #2
Mississauga ON L4W 5S9
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Purpose served by this chemical
FunctionChemical of Concern (CoC)
Chemical of Concern(CoC)Quaternium-24 032426-11-2 -- Antimicrobial Active Yes 
CoC List
Didecyl dimethyl ammonium chloride 007173-51-5 -- Antimicrobial Active Yes CoC List
Dioctyl dimethyl ammonium chloride 005538-94-3 -- Antimicrobial Active Yes CoC List
Water 007732-18-5 -- Diluent No Isobutane 000075-28-5 5.0-10.0 Propellant Yes CoC List
Diethylene glycol monobutyl ether 000112-34-5 1.0-5.0 Solvent Yes CoC List
Tetrasodium EDTA 000064-02-8 1.0-5.0 Chelating Agent No Polyethylene glycol (5) undecyl ether 034398-01-1 -- Surfactant No Fragrance(s)/perfume(s) 000000-00-1 -- Withheld as CBI No Sodium molybdate 007631-95-0 -- Corrosion Inhibitor No Sodium lauroyl sarcosinate 000137-16-6 -- Surfactant No Ammonium hydroxide 001336-21-6 -- pH Adjuster Yes CoC List
Trimethylhexyl Acetate 058430-94-7 -- Fragrance No Hexyl Cinnamal 000101-86-0 -- Fragrance Yes CoC List
Butylphenyl Methylpropional 000080-54-6 -- Fragrance Yes CoC List
2,6-Dimethyl-7-Octen-2-Ol 018479-58-8 -- Fragrance No Dipropylene glycol 025265-71-8 -- Fragrance No Eugenol 000097-53-0 -- Fragrance Yes CoC List
3a,4,5,6,7,7a-Hexahydro-4,7-methanoinden-6-yl acetate 005413-60-5 -- Fragrance No Sodium hydroxide 001310-73-2 -- Non-Functional Constituent Yes CoC List
Trisodium nitrilotriacetate 005064-31-3 -- Non-Functional Constituent No SD Alcohol 38B 000064-17-5 -- Non-Functional Constituent Yes CoC List
Mixed dialkyl (C8-C10) dimethyl ammonium chloride 068424-95-3 0.1-1.0 -- No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :June 24, 2019 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2 1 0 Measure of Alkalinity/Acidity of substance or preparation where a level of 7 is considered as neutral.
pH Levels12.2-13.2 -
Warnings
Hazard Statements
Danger. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes eye irritation.
Precautionary statements
General
Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Prevention
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Wash hands thoroughly after handling. Pressurized container: Do not pierce or burn, even after use.
Response
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or physician.
Storage
Protect from sunlight. Do not expose to temperatures exceeding 50 deg C/122 deg F. Store in a well-ventilated place.
Disposal
Not applicable. -
Acute health effects
From SDS:
Hazards Identification
Emergency Overview
Danger. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes eye irritation.
Potential Health Effects
Routes of exposure: Not available.
Eye Contact: Causes eye irritation.
Skin Contact: No known significant effects or critical hazards.
Inhalation: No known significant effects or critical hazards.
Ingestion: No known significant effects or critical hazards. -
Chronic health effects
From SDS:
Not available. -
Carcinogenicity
No known significant effects or critical hazards.
-
Handling information
Put on appropriate personal protective equipment . Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 deg C. Do not pierce or burn, even after use. Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing gas. Avoid breathing vapor or mist. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Empty containers retain product residue and can be hazardous. Do not store above the following temperature: 50 deg C (122 deg F). Store in accordance with local regulations. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Eliminate all ignition sources. Use appropriate containment to avoid environmental contamination.
-
Disposal information
The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Do not puncture or incinerate container.
-
First Aid
Eye Contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. If irritation persists, get medical attention.
Skin Contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.
Ingestion: Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Notes to Physician: In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.
Protection of First Responders: No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
-
UN Global Harmonization Classification
